Header
buyPartswantedProcessfaqsellaboutaboutcontact
main1
1973 Mercury Comet
ID# 111637
 
 
 
1973 mercury comet
condition: good
cylinders: 8 cylinders
drive: rwd
fuel: gas
paint color: blue
size: compact
transmission: automatic
type: sedan
I bought this car in back in 2004 from a transmission shop. Over the years I have driven this car and slowly restored it .
Never found out prior history of the vehicle .

Straight car . 2 small minor spots of rust one on passenger door and quarter panel

Rebuilt original 302
-Cleaned magna-fluxed
-resurfaced/decked
-bored .030 over
-new plugs
-resurfaced crank
-upgraded connecting rods with upgraded arp rod bolts
- forged pistons speedpro flat tops with valve reliefs
-edelbrock performer rpm heads . 2.02 intake valve
-larger intake valve
-arp head bolts
-compcam screw in rocker studs.
-compams diecast full roller rockers
-compcams pushrods
-mercury comet aluminum tall valve covers
-compcam XE268H camshaft .509 intake .512 exhaust
-compcam hydraulic lifters
-port matched intake and exhaust runners
-edelbrock performer rpm intake
-Holley aluminum street avenger 670cfm carb
-1/2 inch spacer open plenum
-msd ecurve distributor
-msd 9mm plug wires
-msd blaster coil
-msd control box
-champion 4 row radiator
-summit electric fan with relay
-100 amp summit alternator
-stock oil pan
-hooker competition headers
-k&n air filter
-compcam double roller timing chain
-anything else just ask

Original rebuilt C4 transmission
-transpack shift kit
-upgraded valve body
-deep rubbed transmission oil pan. With drain plug
-B&M holeshot 2400 stall converter
-B&M floor shifter with cable
-balanced driveshaft
-new U-joints

Rebuilt Ford 8 Inch rear end
-subframe connectors
-upgraded axles
-Eaton truetrac
-new bearings
-new gear oil
-rebuilt drum brakes including all hardware
-new emergency brake cables
-3.55 gear
-HD leaf springs
-KYB rear shocks
-New U bolts
-All painted and chassis under coated


Front end
-All painted and undercoated
-new SPC lowering springs
-SPC upper control arms
-SPC lower control arms
-Stock spindles
-Ball bearing spring perches
-Billstein shocks
-SPC strut rods
-SSBC disk brake conversion kit
-New brake lines
-New proportioning valve
-New master cylinder
-upgraded sway bar
-HD crossmember bar *belly bar*


Interior
-new ACC carpet kit
-headliner ok condition
-dash small crack on pad
-bench seat reupholstered at some point
-new seat belts
-90% repainted interior
-heater and air works
-temp. Volts oil pressure gauges
-new weatherstripping

 
Asking Price: A$12,240
 
Secure Handover: A$432
Transport to terminal: A$504
Preparation/Quarantine: A$375
Packing/Customs/Shipping: A$2,485
Unpacking: A$350
Broker: A$450
GST: A$1,472
 ___________
Sub Total: A$18,308
 
Local Port Costs
Brisbane Fees: A$515
Fremantle Fees: A$1,080
Sydney Fees: A$515
Melbourne Fees: A$515
 ___________
Price range: A$18,823 - A$19,388
 
Additional Services
Inspection: A$576
Marine Insurance: A$158

If the Sub Total for this vehicle exceeds A$65,000 Luxury Car Tax will be applied by Australian Customs.

All West Coast vehicles that do not have wood as part of their manufacture (eg pickup truck with wooden bed or old vehicle with wood interior) and qualify for our pre-cleaning certification are guaranteed to pass Australia Quarantine upon entry. If they do not pass there will be NO additional cleaning costs charged to you.

The above price includes NATA Approved Asbestos Testing on all West Coast vehicles. If they test positive for asbestos only in the brakes, there will be an A$400 fee for the removal, installation of new brake pads and reinspection. The A$400 fee does not include the cost for the new brake pads. If asbestos is found elsewhere we will consult with you what options you have to move forward.

We are working on a similar solution for the East Coast vehicles.



  

BACK TO CARS FOR SALE CURRENT PAGE | BACK TO CARS FOR SALE | TOP

 
Home |  Cars for Sale |  Freight |  Wanted
Process |  FAQ |  Sell |  Photo Gallery |  Searches |  Container Status |  Rust |  About |  Contact Us

<<< Follow us >>>